 |
Water based urethane coatings for interior surfaces. |
Water based paints for interior and exterior uses. |
Epoxy coating for use in swimming
pools, food processing areas, floors, workshops etc. |
Silicone Resin Emulsion Paint ideal for breathing surfaces, such as plaster, render
and adobe surfaces. |
|
Product Information
Proven Performance
HIGH BUILD EPOXY The perfect solution for swimming pools. Ideal for use in food areas, portable water, dairy companies, health institutions and for fishing and freezing work applications.
EPOTEC HIGH BUILD EPOXY will cure to give a hard durable chemical resistant surface, which is jointless, hygienic and mould resistant. Manufactured for concrete, concrete block and fibreglass swimming pools.
EPOTEC HIGH BUILD EPOXY is available in a 3kg Kit which contains a solventless epoxy base plus a separate hardener. When mixed together and applied according to these instructions a very hard, smooth tile-like appearance is achieved.
EPOTEC HIGH BUILD EPOXY is applied in two coats of 125 microns each, for longest lasting effect, which will give a total dry film thickness of 250 microns. Do NOT apply at a greater thickness of 500 microns in one coat under any circumstances. Each 3 kg Kit will cover up to 18M2 for each 125 micron coat. Medium blue is by far the most desirable colour because of its light fast quality under extreme atmospheric and marine conditions. A limited range of colours is available. It is a proven product for the painting and/or repairing of well prepared swimming pool surfaces.
What's Good About Epotec High Build Epoxy?
- It is a genuine high build. That means what you put on 'wet' dries essentially to that thickness.
- It does not require a primer undercoat on most substrates saving time and money in material and labour.
- It cures very hard and can be used for a wide variety of applications from floors to steelwork.
- It is a proven product for the painting and / or repairing of well prepared swimming pool surfaces.
Other Uses
Epotec High Build Epoxy is also suitable for a wide range of industrial and domestic applications including the following:
| Iron & Steelwork | Brickwork | Non-ferrous Metals | | Fibre Cement | Concrete |
Plaster | | Milking Sheds | Timber Surfaces | Cement Rendering |
If in doubt we recommend you seek prior advice before commencing any particular project. |
|
|
